About Our Threaded Inserts ：
1. Threaded Inserts are standard available in titanium alloy and have 2 or 4 pre-assembled inserts according to the dimensions. They have the characteristics of ultra-light and corrosion resistance.
2. After installation of the inserts into the parent material the assembly is form-closed.
3. Each threaded insert has its own installation tool kits.
Threaded Inserts Function：
1. They are used in aluminium alloys, light Materials, steel, and carbon fiber to increase the strength of the thread in these materials.
2. They can be used for thread repair, if the defected thread has to be replaced with the same nominal diameter.
Threaded Inserts Application：
1. Typical applications are transmission housings, electronic equipment, and suspension units
2. Aircraft and high-speed rail seat installation
3. Communication equipment
4. Hydrofoil carbon fiber plate
Threaded Inserts Parameter
2KEY-LOCKING THREADED INSERTS LIGHT DUTY |
NO | Internal thread（mm） | External thread(mm） | Length（mm） |
1 | M4X0.7mm | M6X0.75mm | 5.25 |
2 | M5X0.8mm | M8X1.25mm | 8 |
3 | M6X1.0mm | M10X1.25mm | 10 |
4 | M6X1.0mm | M10X1.5mm | 8 |
5 | M6X1.0mm | M10X1.5mm | 10 |
4KEY-LOCKING THREADED INSERTS LIGHT DUTY |
NO | Internal thread（mm） | External thread(mm） | Length（mm） |
1 | M8X1.25mm | M12X1.25mm | 12 |
2 | M8X1.0mm | M12X1.25mm | 12 |
3 | M10X1.5mm | M14X1.5mm | 14 |
4
| M10X1.25mm | M14X1.5mm | 14 |
5 | M12X1.75mm | M16X1.5mm | 16
|
6 | M12X1.25mm | M16X1.5mm | 16 |
Installation Instructions：
STEP 1-Drill the hole or drill out the old thread with a standard drill apply a chamfer if required.
STEP 2-Tap the new thread with a standard tap.
STEP 3-Install the threaded inserts by screwing it into the new thread. You can do this by hand, or by using the installation tool.
STEP 4-For inserts, the installation tool is used to drive inserts in, double check if the inserts are still straight every time you hammer them in.
